ROAD PEDALS

KEO SYSTEM

4 Results
Pedals Road Bike Scrc302
SC-R302
Pedals Road Bike Scr304st 01
SC-R304ST
Pedals Road Bike Scr301
SC-R301
Pedals Road Bike Scr305
SC-R305

SHIMANO SYSTEM

3 Results
Pedals Road Bike Scr503
SC-R503
Pedals Road Bike Scr502
SC-R502
Pedals Road Bike Scr501
SC-R501

OTHER

6 Results
pedals road bike scr904
SC-R904
pedals road bike scr905
SC-R905
Pedals Road Bike Scr906
SC-R906
Pedals Road Bike Scr701b
SC-R701B
Pedals Road Bike Scr702
SC-R702
Pedals Road Bike Scr703
SC-R703

Description

SCADA’s road pedals come in two basic categories: Look-compatable and Shimano-compatible. Let’s firstly check out the Look compatible models—Keo and Delta.

Keo

There are four models in SCADA’s Keo range in two tiers. The SC-R302 is the first of the two models in the top tier. It’s constructed from 6061 aluminum. The body is CNC machined.The axle is Chromoly, and is also CNC-machined. The spring-loaded binding which holds the pedal cleat in position is made from thermoplastic reinforced with glass-fiber. The tension is adjustable. Compatible cleats are: SC-ARC10, SC-BLK10, SC-ARC11, and the SC-BLK11. The bearing is LSL bushing, sealed. Each piece weighs in at 157g.

A note about LSL bearings or Lightweight Self Lubricating bearings which are oil impregnated bushing bearings. These allow building a lighter pedal. The profile is lower which means a lower stack-height. The stack height is the distance from the center of the axle to the sole of the shoe. They are extremely light, extremely low friction, and almost completely unaffected by temperature. They can also take heavy loads under low velocity as in cycling. 

The second model model in the top tier is the SC-R305 made from 6061 aluminum. The body is CNC machined.The  CNC-machined axle is chromoly in cartridge form. The spring-loaded binding is made from thermoplastic reinforced with glass-fiber. The tension is adjustable. Compatible cleats are: SC-ARC10, SC-BLK10, SC-ARC11, and the SC-BLK11. The bearing is LSL bushing, sealed. Each piece weighs in at 146g.

The first model in the second tier is the SC-R304ST with a thermoplastic injected body rather than aluminum. The axle is CNC machined. The spring-loaded binding is thermoplastic reinforced with glass-fiber. The binding tension is also adjustable. Compatible cleats are: SC-ARC10, SC-BLK10, SC-ARC11, and the SC-BLK11. The bearing is LSL bushing, sealed.  Each piece is 125g.

The second model in the second tier is the SC-R301, also available in a variation—SC-R301B. The body is made from die-cast aluminum, with a CNC-machined chromoly (cartridge) axle. The binding is thermoplastic, fiber-glass reinforced. The binding tension is also adjustable. Compatible cleats are: SC-ARC10, SC-BLK10, SC-ARC11, and the SC-BLK11. The bearing is LSL bushing, sealed. The SC-R301B version has ball bearings. Each piece is 164g.

Delta

The Delta range consists of two models. The first is the SC-R101 with a hand-polished aluminum body and CNC-machined chromoly axle. The bearing is LSL bushing. The binding is thermoplastic, fiber-glass reinforced with a tension-adjustable binding. Compatible cleats are the SC-ARC1 and the SC-BLK1. Each piece is 164g. The second model, SC-R102, consists of a thermoplastic black body, a CNC-machined chromoly axle, an LSL bushing, sealed. The binding is also thermoplastic, glass-fiber reinforced and tension-adjustable. Each piece is 162g.

Shimano SPD-SL & SPD

SCADA’s Shimano-compatible range consists of three SPD-SL models, four SPD models and three flat pedals.

The first of the SPD-SL models is the SC-R503, with a 6061 aluminum, CNC-machined body and a CNC-mahcined chromoly axle. The binding is thermoplastic, fiber-glass reinforced with a tension-adjustable binding. The suitable cleats are the SC-RSL1, SC-BSL1, SC-RSL11, and the SC-BSL11. The bearing is LSL bushing, sealed. Each piece is 163g. The second model is the SC-R502 with an injection thermoplastic body. The axle is CNC-machined chromoly (cartridge).The binding is thermoplastic, fiber-glass reinforced with a tension-adjustable binding. The suitable cleats are the SC-RSL1, SC-BSL1, SC-RSL11, and the SC-BSL11. The bearing is LSL bushing, sealed. Each piece is 148g. The third model is the SC-R501. It has a die-cast aluminium body and CNC-machined chromoly (cartridge) axle.The binding is glass-fiber reinforced  thermoplastic, with a tension-adjustable binding. The suitable cleats are the SC-RSL1, SC-BSL1, SC-RSL11, and the SC-BSL11. The bearing is LSL bushing, sealed. Each piece is 165g. 

The first of the SPD models is the SC-R904, with a 6061 aluminum, CNC-machined body and a CNC-machined chromoly axle. The bearing is LSL bushing, sealed. The binding is chromoly, single-sided, and tension adjustable. Each piece weighs 132g.The compatible cleat is SC-C01F. The second SPD model is the SC-R905. Like the R904, the R905 has a 6061 aluminum, CNC-machined body and a CNC-machined chromoly axle. The bearing is LSL bushing, sealed. The binding is chromoly, single-sided, and tension adjustable. The compatible cleat is also SC-C01F. Each piece weighs 138g. The extra few grams is due to the extra support on the rear, making it more of a design you might find on an mtb. The third SPD model is the SC-R906. The spec is identical to the R905, although it weighs in at 136g, and the shape is a little different. The final SPD model is the SC-R901. It has a die-cast, high-polished aluminium body and CNC-machined chromoly axle.The binding is chromoly, single-sided, and tension adjustable.The compatible cleat is also SC-C01F. The bearing is LSL bushing, sealed. Each piece is 135g.

Flat

The first of the flat pedals is the SC-R701B, with a polypropylene body, a forged chromoly axle, and ball bearings. The binding is the EMP267 toe-clip and strap. Each piece is 147g. The second of the flat pedals is the SC-R702, with a die-cast, high-polished aluminium body and CNC-machined chromoly axle. You can attach a toe-clip and strap to this. The bearing is LSL bushing, sealed. A ball-bearing version, SC-R702B is available. Each piece is 127g. Reflectors are included. The third is SC-R703. It has a die-cast, high-polished aluminium body and CNC-machined chromoly axle. The bearing is LSL bushing, sealed. A ball-bearing version, SC-R703B is available. Each piece is 134g. Reflectors are included.

***

Scroll to Top